Sennheiser ME 66
Equipment unavailable?
Didn't find what you were looking for?
Need help choosing equipment?
Call or write to us!
Sennheiser ME 66 is a highly directional short shotgun microphone head designed for location sound, interviews, documentary work, reporting and film production. It belongs to Sennheiser’s modular K6 system and is intended to be used with the K6 or K6P powering module rather than as a standalone microphone. Its supercardioid/lobar pickup pattern strongly favours sound arriving from the front while reducing off-axis noise, making it useful when the microphone needs to isolate dialogue or a specific source from surrounding ambience.
Directional pickup for dialogue and location recording
The ME 66 uses an interference-tube shotgun design with a supercardioid/lobar polar pattern. Compared with a standard cardioid microphone, it provides considerably stronger rejection from the sides and is therefore well suited to boom operation, interviews and situations where the microphone cannot be positioned extremely close to the subject. Sennheiser specifically designed the model for reporting, film and broadcast location work, including the capture of quieter signals in noisy or acoustically active environments. Its high sensitivity of 50 mV/Pa also means that a healthy recording level can be achieved without relying on excessive preamp gain.
Wide frequency response and low self-noise
The microphone head covers a frequency range of 40 Hz to 20 kHz, providing enough low-frequency extension for natural speech while retaining detail in the upper frequencies. Equivalent self-noise is rated at 10 dB A-weighted, which is low for a compact shotgun design and makes the ME 66 useful when recording quieter dialogue or ambience. Maximum sound pressure level is approximately 126 dB at 1 kHz for 1% THD, allowing the microphone to handle substantially louder sources than normal spoken dialogue without immediate overload.
K6 and K6P modular powering system
The ME 66 microphone head connects directly to a Sennheiser K6 or K6P powering module. With the K6 attached, the complete microphone can operate from 12–48 V phantom power or from a single 1.5 V AA battery, which is especially useful when recording with equipment that does not provide phantom power. Sennheiser specifies approximately 150 hours of battery operation for the K6 under its test conditions. The K6 also provides a switchable low-frequency roll-off filter that can help reduce handling noise, wind rumble and unwanted low-frequency vibration. The K6P version is intended for phantom-powered operation.
Compact shotgun format for boom poles and camera rigs
The ME 66 head itself measures 221 mm in length and weighs only 65 g. When combined with a K6 module, the complete microphone remains relatively lightweight, which is useful on a boom pole during longer takes. A foam windshield can be used for light air movement, while stronger outdoor wind normally requires a more substantial windshield or blimp system. Because shotgun microphones are very sensitive to positioning, the best results are obtained when the microphone is aimed accurately at the speaker and placed as close as the frame allows.
Rent Sennheiser ME 66 at CamCam Rental
At CamCam Rental we can help you build a complete dialogue-recording setup around the Sennheiser ME 66, including a boom pole, windshield, recorder, XLR cabling and wireless microphones when required. If you are deciding between a shotgun microphone and a lavalier system, we can help choose the option that best suits the location and type of production. Our team works with film and photo equipment on real sets, so we can also help with microphone placement, powering and recorder configuration before pickup. Availability can be checked online and the rental can be ordered directly through the website.
- Sennheiser ME 66 Shotgun Microphone
- Windscreen
- Carrying Case
- Microphone type: short shotgun condenser microphone head
- Transducer principle: permanently polarised condenser / back-electret
- Pickup pattern: supercardioid / lobar
- Frequency response: 40 Hz – 20 kHz ±2.5 dB
- Sensitivity: 50 mV/Pa ±2.5 dB at 1 kHz
- Equivalent self-noise: 10 dB A-weighted / 21 dB CCIR-weighted
- Maximum SPL: 126 dB at 1 kHz, 1% THD
- Nominal impedance: 200 Ω with K6
- Minimum terminating impedance: 1 kΩ with K6
- Compatible powering modules: Sennheiser K6 and K6P
- K6 power options: 12–48 V phantom power or 1 × AA battery
- K6 battery life: approximately 150 h
- Low-cut filter: available on K6 / K6P powering module
- ME 66 dimensions: Ø 22.5 × 221 mm
- ME 66 weight: 65 g
- Typical applications: boom recording, interviews, documentary, reporting and film location sound
