EcoFlow DELTA 3 1500 Portable Power Station

The EcoFlow DELTA 3 1500 Portable Power Station is a high-capacity portable battery system designed for production environments that need substantial energy storage, strong AC output and fast backup switching in a transportable format. Its 1536 Wh LiFePO4 battery provides 50% more built-in capacity than the standard 1 kWh class of power stations, while the 1800 W pure sine-wave inverter can run a wide range of lighting, monitoring, charging and computer equipment. The DELTA 3 1500 is particularly useful for mobile DIT stations, multi-device charging areas and longer location shoots where additional runtime is more important than minimum weight.

 

1536 Wh LFP battery expandable to 5.5 kWh

 

The built-in battery stores 1536 Wh and uses lithium iron phosphate cells for long-term durability and thermal stability. EcoFlow specifies 3000 cycles before the battery retains approximately 70% or more of its original capacity. The system can be expanded with compatible DELTA 3, DELTA 2, DELTA 2 Max or DELTA Pro 3 Extra Batteries, allowing total system capacity to reach approximately 5.5 kWh for much longer production or backup runtimes.

 

1800 W AC output with 3600 W surge

 

The European DELTA 3 1500 provides four AC outlets with a combined continuous output of 1800 W and a surge rating of 3600 W. X-Boost can support selected compatible appliances rated up to approximately 2400 W. For production electronics such as computers, video equipment and chargers, the standard 1800 W rating should be treated as the primary continuous limit when calculating system load.

 

1500 W AC charging in approximately 90 minutes

 

EcoFlow specifies AC charging input up to 1500 W, allowing the DELTA 3 1500 to recharge from empty to full in approximately 1.5 hours. This fast charging speed is valuable when the station is used intensively throughout a production day and needs a rapid turnaround between work periods. It can also be charged through solar, vehicle and compatible EcoFlow generator systems, depending on the available power source.

 

500 W solar input and fast vehicle charging

 

The DC input supports solar charging from 11 to 60 V at up to 15 A, with a maximum solar input of 500 W. EcoFlow specifies approximately 3.5 hours for a full solar recharge under suitable conditions. The station can also use the EcoFlow 800 W Alternator Charger, which can recharge the battery in roughly two hours while travelling, making it useful for mobile crews moving between locations.

 

Thirteen output ports for multi-device setups

 

The DELTA 3 1500 provides a total of 13 output connections: four AC sockets, two standard USB-A ports, two 18 W fast-charge USB-A ports, two 100 W USB-C ports, one 12.6 V car-style output and two DC5521 outputs. This makes the unit particularly useful as a central power hub for several pieces of equipment, reducing the need for multiple smaller battery stations around a production workspace.

 

UPS switching in under 15 ms

 

The DELTA 3 1500 includes a standby UPS function with a specified switchover time below 15 ms. When mains power fails, compatible connected equipment can continue operating from the internal battery with only a brief interruption. This makes the station well suited to mobile editing systems, network equipment, monitoring stations and other electronics where an unexpected power loss could disrupt a production workflow.

 

Quiet operation and IP54-protected battery pack

 

EcoFlow specifies operating noise below 35 dB at loads under 600 W and below 45 dB at around 1200 W, helping the unit remain relatively unobtrusive in sound-sensitive environments. The internal battery pack carries an IP54 protection rating against dust and water ingress. Wi-Fi and Bluetooth connectivity provide additional monitoring and control through the EcoFlow app.

 

High capacity in a 16.5 kg portable format

 

The DELTA 3 1500 measures approximately 400 × 212 × 282 mm and weighs up to around 16.5 kg. Although heavier than smaller 1 kWh-class power stations, it remains compact enough to transport between locations using its integrated handles. The additional capacity makes it attractive for longer shoots where reducing the frequency of recharging or battery changes is more important than minimizing kit weight.

 

Rent the EcoFlow DELTA 3 1500 at CamCam Rental

 

At CamCam Rental the EcoFlow DELTA 3 1500 is a strong portable power option for longer production days, DIT workstations, charging stations, monitors, compact lighting systems and other equipment that benefits from approximately 1.5 kWh of built-in energy storage. Current availability can be checked online, and our team can help you estimate expected runtime and determine whether the 1800 W output and expandable capacity are suitable for your production setup.