EcoFlow DELTA 2 Portable Power Station
Equipment unavailable?
Didn't find what you were looking for?
Need help choosing equipment?
Call or write to us!
The EcoFlow DELTA 2 Portable Power Station is a high-capacity mobile power solution designed for film sets, photo productions, DIT stations, lighting setups and other workflows that need reliable mains-style power away from a fixed electrical supply. With a 1024 Wh LiFePO4 battery and 1800 W pure sine-wave AC output, it can run substantially more demanding equipment than compact portable power stations while remaining transportable at approximately 12 kg. The combination of fast charging, multiple output ports and expandable capacity makes the DELTA 2 a versatile choice for both location work and temporary backup power.
1024 Wh LiFePO4 battery with expandable capacity
The DELTA 2 uses long-life LFP battery chemistry with a nominal capacity of 1024 Wh. EcoFlow specifies more than 3000 full charge cycles before the battery reaches approximately 80% of its original capacity. The system can also be expanded with a compatible DELTA 2 Extra Battery or DELTA Max Extra Battery, increasing the available energy storage when longer runtimes are required for production or backup applications.
1800 W AC output with 2700 W surge
Four European AC outlets provide a combined continuous output of up to 1800 W with a surge rating of 2700 W. This allows the DELTA 2 to run many professional laptops, battery chargers, monitors, compact lighting fixtures and other production devices. X-Boost can support selected compatible loads rated up to approximately 2400 W, although sensitive electronics should normally remain within the standard 1800 W continuous rating.
Fast AC charging in approximately 80 minutes
EcoFlow’s X-Stream charging system supports AC input up to 1200 W. Under suitable conditions, the DELTA 2 can charge from 0 to 80% in approximately 50 minutes and from 0 to 100% in about 80 minutes. This fast turnaround is particularly useful on busy production days when the power station may need to be restored between setups or recharged quickly before the next location.
Up to 500 W solar charging
The DELTA 2 accepts solar input from 11 to 60 V at up to 15 A, with a maximum charging power of 500 W. With compatible panels and suitable conditions, EcoFlow specifies solar charging in as little as approximately three hours. Vehicle charging is also supported from 12 V or 24 V systems, giving crews several ways to recharge the station when conventional mains power is not continuously available.
Multiple AC, USB and 12 V outputs
The European DELTA 2 provides four AC sockets, two standard USB-A outputs, two 18 W fast-charge USB-A ports, two 100 W USB-C Power Delivery ports, one 12.6 V car-style output and two DC5521 outputs. This combination makes it possible to power or charge several production devices at once, including laptops, tablets, phones, camera batteries, wireless systems and accessories, while keeping different voltage requirements separated across dedicated ports.
EPS backup and remote app control
The DELTA 2 can function as an emergency power supply with automatic switchover to battery operation when incoming mains power fails. EcoFlow specifies an EPS transfer time below approximately 30 ms. Wi-Fi and Bluetooth connectivity also allow the station to be monitored and controlled through the EcoFlow app, including battery status, charging speed, output settings and selected energy-management functions.
Portable format for location production
The DELTA 2 measures approximately 400 × 211 × 281 mm and weighs around 12 kg. Integrated handles make it relatively easy to move between workstations, camera positions or shooting locations. The combination of around 1 kWh of capacity and 1800 W output makes it a useful middle ground between compact power stations and much larger battery systems that are heavier and more difficult to transport.
Rent the EcoFlow DELTA 2 at CamCam Rental
At CamCam Rental the EcoFlow DELTA 2 is a practical portable power source for camera departments, lighting setups, mobile editing stations, monitors and charging equipment. It is especially useful on locations where mains access is limited or where a quiet battery-based alternative to a generator is preferred. Current availability can be checked online, and our team can help you estimate whether the 1024 Wh capacity and 1800 W output are sufficient for the devices used on your production.
- EcoFlow DELTA 2 Portable Power Station
- AC Charging Cable
- Battery capacity: 1024 Wh
- Battery chemistry: LiFePO4 / LFP
- Battery cycle life: 3000+ cycles to approximately 80% capacity
- Continuous AC output: 1800 W
- AC surge output: 2700 W
- AC waveform: pure sine wave
- X-Boost: up to approximately 2400 W for compatible loads
- European AC outlets: 4
- AC charging input: up to 1200 W
- 0–80% AC charging time: approximately 50 minutes
- 0–100% AC charging time: approximately 80 minutes
- Solar input: up to 500 W, 11–60 V / 15 A
- USB-A outputs: 2 × 12 W
- Fast-charge USB-A outputs: 2 × 18 W
- USB-C outputs: 2 × 100 W Power Delivery
- Car-style DC output: 12.6 V / 10 A, up to 126 W
- DC5521 outputs: 2 × 12.6 V / 3 A, up to 38 W each
- EPS transfer time: under approximately 30 ms
- Capacity expansion: supported with compatible EcoFlow Extra Battery
- App control: Wi-Fi and Bluetooth
- Discharge temperature: -10°C to 45°C
- Charge temperature: 0°C to 45°C
- Dimensions: approximately 400 × 211 × 281 mm
- Weight: approximately 12 kg
