Camtree G-51 Camera Gripper Campod Suction Car Mount
Equipment unavailable?
Didn't find what you were looking for?
Need help choosing equipment?
Call or write to us!
Camtree G-51 Camera Gripper Campod Suction Car Mount is a modular three-point suction system designed for filming from moving or stationary vehicles. The rig can be positioned on areas such as the hood, roof, side panel or windshield, giving the camera operator considerably more freedom than a conventional tripod. It is intended for exterior or interior vehicle shots, tracking sequences, commercials, music videos and other productions where the camera needs to travel with the car.
Three suction cups and a modular support structure
The system uses three gripper suction cups connected to the central camera mount through articulated legs. Six 6-inch extension rods, three 3-inch rods and six ball tilt heads allow the geometry of the rig to be adapted to the available mounting surface. This makes it easier to work around curves and different body-panel shapes while keeping the camera platform in the required position. The camera can be attached using 1/4″-20 or 3/8″-16 mounting hardware, so the system works with a broad range of camera bodies, plates, heads and compatible gimbal accessories.
Up to 10 kg while moving and 20 kg for static setups
According to the manufacturer specification, the G-51 supports camera rigs up to 10 kg / 22 lb while the vehicle is moving and up to 20 kg / 44 lb in a static setup. The stated maximum driving speed is 40 km/h / 25 mph. These limits are important when planning a car shot: the complete weight of the camera, lens, cage, plate, head and any additional accessories should be considered as one payload. Two safety straps are included to create secondary safety points and should be used whenever the mount is installed on a vehicle.
Flexible positioning for car-to-car and mounted camera shots
The G-51 is particularly useful when a fixed camera angle is required directly from the vehicle body. Depending on the configuration, it can be used for front, side, rear-facing or interior perspectives without building a large speed-rail rig. Before every take, the contact surface and suction cups should be clean and the complete setup should be checked for secure attachment. A fluid or video head is not included, so if the shot requires additional pan or tilt adjustment, a compatible head must be added separately.
Rent Camtree G-51 Camera Car Mount at CamCam Rental
At CamCam Rental we can help you configure the car rig around your camera, lens and the type of shot you are planning. Because we work on film and photo sets ourselves, we can also advise on additional grip, safety and stabilization accessories that may be useful for a particular production. Current availability can be checked directly on our website and the order can be placed online without calling or sending an email. We are open seven days a week, offer equipment delivery and collection, and you can arrange a free equipment test before the shoot.
- Camtree G-51 Camera Gripper Campod Suction Car Mount
- 3× Gripper Suction Cups
- 6× 6″ Extension Rods
- 3× 3″ Extension Rods
- 6× Ball Tilt Heads
- 2× Safety Straps
- 3× Shanks for Gripper Cups
- 2× Mounting Screws (1/4″ and 3/8″)
- 2× Allen Keys
- 2× Washers
- 2× Round Hooks
- 2× C-Hooks
- Carrying Bag
- Mount type: three-point suction camera car mount
- Suction cups: 3 gripper suction cups
- Moving load capacity: up to 10 kg / 22 lb
- Static load capacity: up to 20 kg / 44 lb
- Maximum vehicle speed: 40 km/h / 25 mph
- Camera mounting screws: 1/4"-20 and 3/8"-16
- Extension rods: 6× 6″ and 3× 3″
- Articulation: 6× ball tilt heads
- Safety system: 2× safety straps with hooks
- Typical mounting positions: hood, roof, side panel or windshield
- Fluid/video head included: no
