Atomos Ninja V 5″ HDR Monitor-Recorder
Equipment unavailable?
Didn't find what you were looking for?
Need help choosing equipment?
Call or write to us!
The Atomos Ninja V is a compact 5-inch HDR monitor-recorder designed for mirrorless, DSLR and cinema-camera workflows that require a bright on-camera display together with high-quality external recording. Its 5.2-inch 1920 × 1080 touchscreen reaches 1000 nits, making it suitable for daylight monitoring, while HDMI 2.0 input and output support video signals up to DCI 4K60 and UHD 4K60. The Ninja V records directly to compatible SSD media in professional editing codecs, allowing camera operators to bypass more compressed internal recording formats when supported by the camera.
5.2-inch 1000-nit HDR touchscreen
The SuperAtom IPS panel has a native resolution of 1920 × 1080, 423 ppi and a brightness of approximately 1000 nits. The touchscreen provides direct access to exposure, focus and recording controls, while the wide 178-degree viewing angle makes the screen practical for camera operating and small crew monitoring. The display supports HDR viewing in HLG and PQ workflows together with common camera Log profiles.
HDMI 2.0 recording up to 4K60
The Ninja V provides one HDMI 2.0 input and one HDMI 2.0 output. It can monitor and record DCI 4K and UHD signals up to 60 fps, depending on the connected camera. The HDMI output can be used for loop-through monitoring or feeding another device in the signal chain. Recording is performed at the incoming resolution and frame rate rather than by converting one format into another.
ProRes, DNxHR and ProRes RAW recording
The recorder supports Apple ProRes and Avid DNxHR for edit-ready video capture and can also record Apple ProRes RAW from compatible cameras that output a supported RAW signal over HDMI. With supported camera and firmware combinations, RAW recording can reach resolutions up to 6K. This allows the Ninja V to function as both a high-quality monitor and an external recorder for workflows where greater post-production flexibility is required.
SSD-based recording workflow
Footage is recorded to compatible SATA SSD media using an Atomos Master Caddy or AtomX SSDmini drive. SSD recording is well suited to high-bitrate 4K and RAW workflows because it provides significantly more capacity and sustained write performance than typical camera memory cards. The removable media design also makes it easy to move recorded material directly into an editing or backup workflow after a shoot.
Professional monitoring tools and 3D LUT support
The Ninja V includes waveform, vectorscope, RGB parade, focus peaking, false color, zebra, frame guides and image magnification. Custom 3D LUTs in .cube format can be loaded and used for monitoring, and compatible LUT processing can also be applied to the HDMI output or baked into selected recordings when required. Anamorphic de-squeeze and Log-to-HDR monitoring make the unit useful with a wide range of cinema and mirrorless camera systems.
Optional SDI expansion
The standard Ninja V does not include native SDI connectors. SDI input, output and HDMI/SDI conversion can be added through the optional AtomX SDI expansion module, which connects through the AtomXpansion interface on the rear of the recorder. This modular design allows the base unit to remain compact for HDMI camera rigs while still supporting professional SDI workflows when the appropriate accessory is installed.
NP-F battery power and compact camera mounting
The Ninja V uses Sony NP-F / L-series batteries and can also run from external DC power through a battery eliminator. Atomos specifies typical operating consumption between approximately 10 and 22 W. The aluminium-alloy chassis measures roughly 151 × 91.5 × 31 mm and weighs about 360 g without battery or media, making it compact enough for on-camera use while still offering a larger, brighter display than most built-in camera screens.
Rent the Atomos Ninja V at CamCam Rental
At CamCam Rental you can combine the Atomos Ninja V with compatible mirrorless or cinema cameras, HDMI cabling, SSD recording media, NP-F batteries and monitor-mounting accessories. It is a practical choice when you need brighter on-camera monitoring together with high-quality external ProRes or RAW recording. Current availability can be checked online, and our team can help you configure the correct recording format, media and power setup for your camera.
- Atomos Ninja V 5″ HDR Monitor-Recorder
- 2x NP-F Battery
- NP-F Battery Charger
- Carrying Case
- 500GB SSD
- SSD Reader
- Magic Arm
- Display size: 5.2″
- Panel type: SuperAtom IPS touchscreen
- Native resolution: 1920 × 1080
- Brightness: approximately 1000 nits
- Viewing angle: 178° horizontal / vertical
- Color depth: 10-bit display processing (8+2 FRC)
- HDR monitoring: HLG and PQ
- Custom 3D LUT support: yes
- HDMI input: 1 × HDMI 2.0
- HDMI output: 1 × HDMI 2.0
- Maximum HDMI video: DCI 4K60 / UHD 4K60
- Standard SDI I/O: no
- Optional SDI expansion: AtomX SDI module
- HDMI / SDI cross-conversion: available with optional AtomX SDI module
- Recording codecs: Apple ProRes, Avid DNxHR and Apple ProRes RAW
- ProRes RAW: up to 6K with compatible cameras
- Recording media: compatible SATA SSD / AtomX SSDmini
- Headphone output: 3.5 mm
- Analog audio input: 3.5 mm mic / line
- Battery support: Sony NP-F / L-series
- External DC power: supported through battery eliminator
- Operating power: approximately 10–22 W
- Monitoring tools: waveform, vectorscope, RGB parade, false color, zebra and focus peaking
- Anamorphic de-squeeze: yes
- Dimensions: approximately 151 × 91.5 × 31 mm
- Weight: approximately 360 g without battery and media
